DESCRIPTION
Nippolac Epoxy Marine Paint specially formulated using high quality epoxy resin and it has excellent adhesion, abrasion resistance and resistance to corrosion by salty water and most of the chemicals. It can use as a finish coat for iron & steel structures specially in highly corrosive environments.
USES
Suitable over most surfaces including iron & metal and concrete. Uses include steel structures, gutters, fences, wrought iron, machinery, trailers etc. It is ideal for Marine, Industrial, and architectural applications.
SURFACE PREPARATION
METAL SURFACES
Use a wire brush or sandpaper to remover rust and scale from the surface to be protected. Surfaces may be shot blasted or abraded using a wire wheel for best results. All dirt, grease, and old paint should be removed. All clean, dry surfaces are essential for the best results. For better adhesion use Nippolac Epoxy Marine Primer as an undercoat.
NEW POURED CONCRETE
Allow to fully cure prior to application. Remove any curing membrane by sanding or etching with 5% HCl or suitable detergent. For better adhesion use Nippolac Epoxy Marine Primer as an undercoat.
PREVIOUSLY COATED CONCRETE
Remove any peeling or degraded paint by sanding or using a paint stripper. For intact paint, thoroughly clean the surface with a strong detergent, and then lightly sand to remove if any gloss.
Reviews
There are no reviews yet.