Waterproofing: Dr. FixIt Pidifin 2K (3kg – 30kg)

Dr. Fixit Pidifin 2K is 2 parts polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry part is mixed with acrylic-modified emulsion and applied
according to direction, the cured.

Dr. Fixit Pidifin 2K will become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface.

Area of Application

• Concrete foundations, basements wall and lift pits.
• Swimming pools, water tanks and reservoirs
• Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters.
• Any other concrete, cement or masonry surface subject to damage from moisture.

Features & Benefits

• Quick-drying
• Easily applied by brush or trowel
• Flexible
• Excellent adhesion to concrete and masonry substrates
• Non-toxic substances
• Environmentally friendly – free Volatile Organic Compound (VOC)
• Can be applied on damp surfaces.
• Excellent waterproofing property – No leakage up to 10 m. hydrostatic pressure.

Method of Application

1. Surface Preparation

• Allow new concrete and masonry substrate to fully cure prior application.
• All surfaces must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled Concrete must be sound before applied.
• Substrate should reach a “Saturated Surface Dry” (SSD) condition (damp, without standing water)

2. Mixing

• Using Portland mechanical mixer, slowly add the Powder part to the Liquid part in a clean container until a smooth and homogenous slurry mixture is achieved.
  Allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior to application. Mixing material must be used within the recommended pot life.

3. Applications

• Dr. Fixit Pidifin 2K slurry can be applied by brush or trowel. DO NOT dilute with water. Recommended coverage rate is approximately 1.1 kg./m2/coat for 0.8 mm. thick of wet film thick (minimum 2 coat.)
• Allow the slurry to cure for at least 1 hour before applying a second coat.

4 Curing

• For maximum protection, allow 12 to 24 hours curing time after the second coat.
• Dr. Fixit Pidifin 2K requires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on-site” to ‘requires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on site’

5. Cleaning

• Dr. Fixit Pidifin 2K can be removed from tools and equipment immediately after use with clean water, only hardened material can be removed mechanically.