Waterproofing Paint: Dr. FixIt Raincoat 2 in1 (1Ltr – 10Ltrs) – Butter Milk

What it does

• Excellent hide and colour retention
• Protect your external walls
• Accommodates surface elongation and contraction
• Does not let ugly cracks show up

Typical Applications

• Building Roofs / Terraces – Flat & Slope.
• Over existing cementitious waterproofing treatments like sound brick-bat Coba, concrete screeds, acrylic coatings, etc.
• All types of exterior masonry surfaces, concrete, cement sand renderings, etc.

Features

• Waterproofing– Provides excellent water-resistant barrier on roof/terrace & exterior wall, increases the durability of the structure.
• Tough and abrasion resistant– Suitable for light foot traffic
• Highly durable and lightweight– UV resistant and needs no extra protective screed. Provides long time protection to buildings that are endangered due to thermal degradation
• Flexible and elastic– Accommodates movements in waterproofing system and covers and bridges hairline cracks
• Easy to apply– No need to remove the existing system. Can be brush or roller applied on vertical surfaces without sagging.
• Elastomeric High elasticity withstands stress caused by thermal expansion & contraction.
• Eco-friendly– Non-Toxic water-based system
• Durability– Provides long time protection to buildings that are endangered due to thermal degradation.

Packaging

1, 4, 10 & 20 litres

Method of Application

1. Surface Preparation – Roof

• Prepare the surface thoroughly by cleaning, washing and removing dust, dirt, oil, grease and lose particles.
• In existing old terraces such as brickbat-Coba or screeds, the substrate must be checked for its soundness.
• Damaged or hollow portions, sharp edges, etc. must be cut and repaired with a polymer-modified mortar using Dr. Fixit Super Latex.
• All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X paste
• Bitumen based waterproofing treatments must be completely removed by mechanical scarification or by any other effective mechanical means.

2. Surface Preparation – Exterior Surface

• All new cement-sand renderings /concrete surfaces should be allowed to age 6 to 8 weeks before surface coating.
• Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by mechanical means such as wire brushing & shot blasting.
• Finally, vacuum cleaning of all loose solids and liquids can be done. if required.
• All surface cracks up to 5 mm width should be filled up with Dr. Fixit Crack-X paste
• Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Super Latex modified mortar.