Specially formulated colourless protecting coating with added Ultra Violet (UV) additive for the treatment of interior and exterior cementitious and concrete surfaces against scratching.
- Ideally, suited for slate, quarry and paver tile, flagstone stamped concrete and concrete tile.
- For all kinds of concrete bricks, slates pave stone and terra cotta tiles.
- Can be used on cementitious substrates too.
Technical Information
Colour | Colourless |
Form | Liquid |
Odour | Solvent odour |
Adhesion | Excellent adhesion to clean, dry and sound surfaces. |
Drying time | Allow 4 hours between coats. |
Coverage | Approx. 7 – 10 sq.m per litre. |
Safety | Non-hazardous. |
Storage Conditions
Store properly in dry conditions, in undamaged and unopened, original sealed packaging. Keep away from direct sunlight, rain, water and moisture.
Ensure surfaces are clean, dry and free from dirt, grease, and efflorescence (a whitish substance) that can prevent absorption of the sealer. Any organic growth such as fungi or algae should be treated first with PYE FUNGIRID. Repair chip-off or concrete surfaces and allow drying before treatment. The new concrete surface should cure for at least 28 days.
Application
Using a brush, roller or low-pressure air spray. Apply evenly on all dry dust-free surfaces. For normal application 2 coats are sufficient. However, 3 coats may be required for a heavy-duty driveway.
Note: PYESLATE SEAL cannot be applied to wet or damp surfaces.
Cleaning of Equipment
Clean all tools and application equipment with the white spirit after use.
Reviews
There are no reviews yet.