Selleys Liquid Nails Instant Hold is a high performance advanced polymer construction adhesive that delivers an instant hold up to 400kg per m2 on any building material, even vertical surfaces. It is heat, UV and water resistant and doesn’t require fasteners or clamps for many applications so you can get on with the next job.
Where can this product be used?
- Suitable for most building materials such as:
- Timber
- Masonry
- Glass
- MDF
- Concrete
- Tiles & ceramics
- Plasterboard
- Particleboard
- Some plastics
- Metals
- Plus more
What materials is this product suitable for?
- Timber
- Masonry
- Glass
- MDF
- Concrete
- Tiles & ceramics
- Plasterboard
- Particleboard
- Some plastics
- Metals
- Plus more
How to Use
- Ensure surfaces are clean and free from grease or lose particles.
- Use a high-thrust caulking gun and the supplied v-notch nozzle to apply in vertical stripes 5cm apart. Ensure the v shape is angled upward when applying.
- Position materials and press them together firmly.
Due to the high initial hold of the product, support during curing is not usually required (subject to weight limitations for non-porous surfaces). Holds instantly but must not be disturbed until cured (up to 48 hours). Adjustable (e.g. can be straightened for up to 15 minutes)
Limitations:
- Not for PE, PP, PTFE and some rubbers
Handy tips
- Usually, mechanical fasteners are required for only 8 hours on porous surfaces and a strong bond is achieved in 24 hours and continues to strengthen over 2-3 days. Cures in 7 days. Expect longer times for thicker applications, less porous surfaces and cold weather.
- Adheres to wet/poor seasoned timber.
- Bridges Gap up to 9mm
- Paintable after 24 hours
Clean Up
- Clean up with mineral turps before the adhesive cures
Reviews
There are no reviews yet.